Red tile positioner (100pcs) + 2mm positioner (500pcs)

1.You can quickly adjust and maintain flatness between tiles.Avoid displacement in cement or tile with the adhesive solidification process.
2.Easy to use, very easy to use.Greatly improves the speed of paving tiles and reduces the difficulty of paving tiles,
3.Tile leveling device (horizontal adjustment between tiles)
4.After the end of work, with the foot ripped off or with a rubber mallet strike along the direction of the slit.
5.Red wedge spacer after removing can also be reusable.

How to use:
1-Use cement or tile glue as needed.
2- According to the size of the tiles, configure one or more ports on each side.
3- Set up the tile and clip 24 hours later and then hit with a rubber mallet.
4-Insert the wedge into the support slot carefully to avoid passing the break point.
5-To facilitate this operation, the use of our special adjustable traction pliers is recommended.
6-When the cement or glue tiles are dried, the simple separation between the chip and the wedge can be done with a rubber mallet or even with the feet.
Colour:Red+transparent